I have found some used wheels with 17x7.5j et35
Would these fit an NC without rolling?
I figure the fact that they are only 7.5” wide may overcome the low offset and help fitment.
The car is currently stock height but will soon be very slightly lowered with ohlins. I really want these wheels but don’t want to modify the guards.
Thanks
17x7.5j et35 will they fit an NC?
Moderators: timk, Stu, zombie, Andrew, -alex, miata
-
emilmh
- Driver
- Posts: 71
- Joined: Tue Aug 04, 2009 8:30 pm
- Vehicle: NC - LE
- Location: North Brisbane
-
Regie
- Speed Racer
- Posts: 4259
- Joined: Thu May 15, 2008 3:02 pm
- Vehicle: NC - V8
- Location: Sydney
Re: 17x7.5j et35 will they fit an NC?
id imagine you will be alright
I had 8" +45 and they would stick out roughly the same as the ones mentioned above
real NC owners go 9" though
I had 8" +45 and they would stick out roughly the same as the ones mentioned above
real NC owners go 9" though
MY07 NC, Mazdaspeed Body, Ohlins, Full GWR Exhaust, 17x9 RPF1's, 4.1FGR and lots lots more
Return to “MX5 Wheels, Suspension, Brakes & Tyres”
Who is online
Users browsing this forum: No registered users and 14 guests
