Need to replace the suspension on mt NC

Wheels, Suspension, Brakes & Tyres questions and answers

Moderators: timk, Stu, zombie, Andrew, -alex, miata

Gunie
Learner Driver
Posts: 3
Joined: Tue Aug 21, 2018 9:24 pm
Vehicle: NC

Need to replace the suspension on mt NC

Postby Gunie » Wed Jan 02, 2019 12:37 pm

Folks,

My NC has need of new suspension as the coils have softened & shocks faded. Noticed significant bottoming out during my kast drive. So am on the hunt. Don't want race performance as its more of a weekend run car fir the missus & I.
Rung Pedders & they have a coil over kit, supplied, installed & whell align for $2229.
Any other recommendations?

Mr Morlock
Speed Racer
Posts: 6444
Joined: Mon Feb 04, 2008 11:40 am
Vehicle: NB8B
Location: Melbourne

Re: Need to replace the suspension on mt NC

Postby Mr Morlock » Wed Jan 02, 2019 4:14 pm

Standard suspension on the car is easily adequate for normal fun use including cruising. It should last pretty high kms- I am guessing the car is north of 150K. Pedders would also do a check on the car rather than just saying replace it all- i.e. is it coils or shockers or both? Go to some other suspension people for a quote and also a local Mazda dealer and that way you get a spread of quotes.

93_Clubman
Speed Racer
Posts: 11717
Joined: Mon Aug 08, 2005 11:35 pm
Vehicle: Clubman
Location: Melbourne

Re: Need to replace the suspension on mt NC

Postby 93_Clubman » Wed Jan 02, 2019 4:52 pm

For replacement MX5 suspension, generally avoid Mazda dealers & Pedders. Assuming below is still your area, then try some suspension specialists around there, or buy a set of coilovers & get them fitted by good mechanic, which code4 recommended in your last post. Other forumites are bound to chip in with suggestions for good coilovers for an NC.
Gunie wrote:Does anyone know of a good, reliable and competent mechanic in the Lockyer Valley/Toowoomba region, who they would recommend for work on an MX5?

User avatar
JBT
Speed Racer
Posts: 7946
Joined: Tue Jun 03, 2003 11:00 am
Vehicle: NC
Location: Brisbane

Re: Need to replace the suspension on mt NC

Postby JBT » Wed Jan 02, 2019 8:00 pm

If you're going to go adjustable (coilover), then get a price on Tein Flex Z.
Alternatively, look at prices for replacement dampers (Koni, Bilstein etc.) - your springs are probably OK unless you have >200,000 km on the car.
Image

User avatar
SS11
Racing Driver
Posts: 506
Joined: Fri Dec 14, 2012 10:49 pm
Vehicle: NC
Location: SE Melbourne

Re: Need to replace the suspension on mt NC

Postby SS11 » Wed Jan 02, 2019 8:08 pm

I second tein, certainly for replacing the standard shocks and having the possibility of setting to height that suits your need, or wants.... fairly straight forward swap, and should not cost a heap to get fitted ( 3 or 4 hours plus alignment)...
consider sway bars maybe too....


Sent from my iPhone using Tapatalk
NC2-- Tein Flex, Tomei Headers, GWR Super Q , RPF1, ECUtek Race Rom...

Gunie
Learner Driver
Posts: 3
Joined: Tue Aug 21, 2018 9:24 pm
Vehicle: NC

Re: Need to replace the suspension on mt NC

Postby Gunie » Wed Jan 02, 2019 9:40 pm

Thanks for the feedback guys.

I too would have expected the shocks/coils to last longer than the 45k kilometres on the clock.

I ended up calling Highfields & had a very interesting chat with one of the guys.
The recommendation was to avoid coilovers as I'm not doing any track work. The car is for weekend runs etc, so I don't need it to be a race car. Rather it remains as a snappy road cruiser with better handling & ride comfort.

The recommendation was to go with Koni shocks in the first instance & only need coils if warranted. Downside is a 6wk wait as there's nil stocks available. Not exactly cheap but know quality, good warranty & support, plus able to be rebuilt if there is any issue.

User avatar
Custardtart
Racing Driver
Posts: 700
Joined: Mon Aug 08, 2016 1:48 pm
Vehicle: NC
Location: Brisbane

Re: Need to replace the suspension on mt NC

Postby Custardtart » Wed Jan 02, 2019 9:57 pm

I’ve got a set of Bilsteins with Eibach springs up for $150. Read my build thread for some more details but as a daily with a bit of trackwork it’s an awesome set up. Only selling as I fitted a set of MCA reds which aren’t as good a road set up imho.
PM me if interested? I also have a set of oem shocks and springs also working perfectly for $50 :mrgreen:
NC1 - 2.5 opposite lock device
Lakeside 62.3

AndyT
Driver
Posts: 60
Joined: Wed Jun 22, 2016 3:05 pm
Vehicle: NC

Re: Need to replace the suspension on mt NC

Postby AndyT » Tue Jul 23, 2019 11:18 am

What did you end up choosing and your thoughts thereafter?


Return to “MX5 Wheels, Suspension, Brakes & Tyres”

Who is online

Users browsing this forum: No registered users and 30 guests